EaseDip C1 Smart Water Sampling System for DJI M300/M350 Drones and Third-Party Drones

EaseDip C1 is a smart aerial-based water sampling system custom-designed for the DJI M300/M350 drones and Third-Party Drones. This system is specifically engineered for beyond visual line of sight (BVLOS) water sampling tasks, offering a fast and cost-effective solution for water sample collection.
DJI Version (1L): Compatible with DJI M300/M350 drones, supports official SDK control.
Third-Party Version (2L&5L): Suitable for other drones, operates in independent control mode.

-EaseDip C1 drone water sampling system integrates a starlight-level night vision camera(option) and a millimeter-level altitude sensor, allows accurate water surface distance measurement, reducing the flight risk of BVLOS water sampling missions.
-The water sampler is equipped with an emergency rope-cutting function to prevent the risk of the water sampler being unable to retract, ensuring the safety of the drone.
-The equipment can perform altitude and fixed-point water sampling and beyond-visual-range water sampling operations.
-Keep your team safe by using EaseDip C1 water samplers to access unreachable and potentially dangerous sampling locations.
-Fully automatic one-touch depth-specific water sampling and manual sampling. Users can choose between automatic and manual modes.

Note:
1. Manual (Non-Camera) Version: Manual version without a millimeter-wave radar or first-person view camera. It is generally recommended to collect water within visual range.
Since this version does not have millimeter-wave radar to assist with speed control, when the sampling bottle touches the water surface, pause the rope release first. Wait until the bottle is fully submerged before continuing to lower the rope.
2. AUTO (Non-Camera) Version: The automatic version without a first-person view camera: is equipped with a millimeter-wave radar for speed control, enabling one-click depth setting for beyond-visual-range water sampling.
3. AUTO (with Camera) Version: The automatic version with a first-person view camera: features millimeter-wave radar for speed control and FPV assistance, allowing for more intuitive beyond-visual-range one-click depth setting for water sampling.
4. It is highly recommended to purchase the automatic version with a first-person view camera for intelligent one-click depth setting, ensuring convenient, safe, and efficient water sampling.
5. For any version of the EaseDip C1 water sampler, do not let it touch the ground during ground tests — this can cause the rope to get tangled in reverse. We recommend doing all tests in real water conditions whenever possible. Even in water, don't let the sampler touch the bottom, as this can also cause reverse tangling.
It is recommended to send the lift command after the sampler is filled with water. If reverse tangling happens, send a stop command immediately.

Specification:
DJI Version:
Dimensions: 221x96x90 mm
Weight: 640 g
Rope Length: 13 m
Water Sampling Container: Default 1L
Total System Weight:
With 1L container: 1950 g (with 1L Water)
With 1.5-liter container: 2500 g (with 1.5L Water)

2L Third-Party Version:
Dimensions: 225x115x95 mm
Weight: Starting from 824 g
Water Collection Capacity: 2L
Total System Weight:
With 2L container, weight 3250 g (with 2L Water)
Power supply voltage: 4S-5S(14.8V-18.5V)

5L Third-Party Version:
Dimensions: 233x112x135 mm
Weight: 1180 g (Water Sampler Only)
Water Sampling Capacity: 5L (Acrylic Sampling Bottle)
Total System Weight: With a 5L container, 7kg (with 5L Water)
Power supply voltage: 5S-6S(18.5V-22.2V)

Your Purchase Includes:
1x EaseDip C1 Smart Water Sampling System for DJI M300/M350 Drones (with 1L Container)
    (or EaseDip C1 Smart Water Sampling System for Third-Party Drones with 2L Container）
    (or EaseDip C1 Smart Water Sampling System for Third-Party Drones with 5L Container）