The 3A-UBEC is a switch mode DC/DC regulator, it outputs a consistent safe voltage for the receiver, gyro and servos.
It is very suitable for RC helicopter and other RC models especially when the built-in BEC in the speed controller has a very limited output capability.
Specification:
Output Voltage: 5V@3A or 6V@3A (Selectable by using a jumper connector)
Continuous output current: 3 Amps
Input: 5.5V-26V (2-6S Lipo or 5-18 cells NiMH /NiCd)
Size: 43mm*17mm*7mm (L*W*H)
Weight: 11g
Features:
Uses an advanced switch mode DC-DC regulator IC.
The output is powerful enough even working with 4S to 6S Lipo battery.
Battery polarity reversal protection.
A metal shield and a filter significantly reduce the electromagnetic interference.
The working status is shown by an LED, it lights when the UBEC works normally.
Manual Download
Related Products
Foxtech
ASSAN UBEC-8A(2-10S)
Features:-It adopted the advanced DC-DC regulator chip with conversion efficiency exceeds 90%.-4 options for the output voltage, applicable for all kinds of receivers/gyros/servos,etc.-2 cables are...
Hobbywing 25A 3-18S High Voltage UBEC
The UBEC is an external switching-mode DC-DC regulator chip designed to regulate voltage. It efficiently converts the high voltage from a 3-18S LiPo battery to a lower voltage suitable for receivers...
Tattu
TATTU 22.2V 6S 10000mAh 25C Lipo Battery
TATTU 6s 10000 25C battery is a powerful lipo battery designed for UAV to ensure longer flight time and better overall performance, it’s suitable for long endurance multicopters or VTOLs. All Tattu...
Foxtech
6s 3300mAh High Discharge Lipo Battery
Foxtech 22.2V 6S 3300mAh high discharge lipo battery weighs 434g, and has 35C continuous discharge current. This battery is suitable for all RC models. This 6S 3300mAh battery also can be...