DAMIAO

The DAMIAO Joint Motor System is a comprehensive motor drive solution designed specifically for the OpenArm open-source humanoid robot arm. It combines the power of DAMIAO 43-series and 8009P motors, meticulously selected for each joint, from the...

The DAMIAO DM-J6248P-2EC is an all-in-one brushless servo joint for robotic arms, integrating the motor and driver in a compact module. Dual encoders provide single-turn absolute output-shaft positioning, while CAN FD (up to 5 Mbps) with PC visual tuning...

The DAMIAO DM-J10010-2EC MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and...

The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position...

The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position...

The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position...

Note: The DM-J8009P-2EC model uses a crossed roller bearing on the output shaft, while the DM-J8009-2EC model uses a thin-section deep groove ball bearing. The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for...

The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position...

The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position...

The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position...

The DAMIAO MIT-Driven Brushless Servo Joint Motor is a high-performance, all-in-one solution for robotic arms. Featuring an integrated driver, built-in gearbox, and dual encoders, it supports three operation modes (MIT mode, Speed mode, and Position...

The DM-S3519 is a compact 42 mm BLDC planetary gear motor with an integrated driver and incremental encoder. It runs at a 24 V rated voltage (driver input 15–52 V supported) and delivers 3.5 Nm rated torque (7.8 Nm peak) with a rated speed of 395...

The DM-H3510 is a compact 42 mm direct-drive BLDC motor with a built-in driver and magnetic encoder. Running at 24 V, it delivers 0.18 Nm rated torque (0.45 Nm peak) at a 500 rpm nominal speed (max 1800 rpm no-load). The controller supports four control...

The DM-2325 is a compact 28 mm BLDC planetary gear motor paired with a matching driver for high-torque, low-speed motion in tight spaces. Running at 24 V (driver supports 24–48 V supply), it delivers 1.35 Nm rated torque and 5 Nm peak, with a rated...

DM-H6215 BLDC Wheel Hub Motor is a compact in-wheel motor with an integrated driver and CAN bus communication. Operating at 24 V, it delivers 1 Nm rated torque (2 Nm peak) at a 120 rpm rated speed (no-load 320 rpm) in a 1:1 direct-drive configuration for...

The cable set is designed specifically for DAMIAO joint motors, providing reliable power, signal, and communication connections between the driver and controller. It includes XT30, GH1.25, SH1.0, and Type-C interfaces with various lengths and...